Flat bike tires can appear at any time between your journeys. You may not carry a patch kit always. That’s why you must know how to fix a flat bike tire without a patch.
Fixing a punctured bike tire can be enjoyable if you know the right way. To overcome such a situation, I have enlisted several methods of fixing flat tires below.
Look: The methods below are the instant solution, not permanent and flexible. You can inflate the tire install following the techniques.
However, you should look for a durable solution after getting to your garage.
Let’s explore the different methods of fixing a flat bike tire without a patch.
How to fix a flat bike tire without a patch?
You may experience a flat tire in the meantime of your riding. Don’t worry about the flat tire if you don’t have a patch kit.
You can inflate the tire using strips, grass, and leaves instantly. Follow the steps below.
Step 1 Stand the bike in a flat place:
Place the bicycle in a safe area apart from the road. Make sure the site is flat.
Looking for a flat place is not mandatory. You can operate the processes efficiently in any condition.
Step 2 Turn the bike upside down:
Hold the middle bars and turn the bike upside down. You may not need to do that if you have the kit.
To make it most efficiently, you have to take out the wheel from the bike. That’s why I turn the bike.
Step 3 Unlock the wheel:
Simply unlock the wheel from the bike. Take out the rim to operate the processes efficiently.
If you cannot turn out the wheel, then keep it straight on the road and follow the steps eventually.
Step 4 Unfold the tire:
You can easily take out the tube from the tire. Hold the rim and use your finger to take out the hose from the tire.
Take out the whole tube from the rim.
Step 5 Find the hole:
Keep your eyes on the tube and find the hole. Using water is the best option to find the hole quickly.
Pump up the tube and rinse it with water. You might get bubbles coming from the hole. Any appearance of the bubbles in the tube is the result of the hole.
Step 6 Tie up two sides around the whole:
Use your shoe strips any soft strips that you can find on the roadside.
Tie up both sides of the leakage area. Make sure you have tight up both sides so that no air can come out.
Step 7 Fill the hole with grass or leaves:
Arrange the leaves around you. You can use hemp to fill the leakage area.
Fill the hole with leaves and grass. Don’t put any stick or tiny substance in the hole. The hole should appear like regular size.
Step 8 Pump up the tire:
Put the tube inside the rim. Before putting the tube, check out the tie areas.
Add air using a hand pump or compressor. Don’t put much air in the tube. Otherwise, it may burst soon. Replace the wheel in the same position. Lock the wheel.
Step 9 Ride slowly:
Don’t panic, getting your flat tire inflated in this way. Ride slowly to your garage.
This process is an instant solution, not a permanent one.
Step 10 Finishing up:
You should change the tube immediately. You can fix the tube permanently using a patch kit.
Don’t ride anymore without fixing the tube with a professional kit.
How to fix a flat bike tire with household items?
Arrange the things below:
You can inflate a flat tire easily just using your household. Get an electric tape or clear tape and an air compressor.
Get a range to take out the wheel from the bike.
Turn the bike upside down:
To take out the wheel from the bike, you have to turn the bike upside down.
Take out the wheel:
Take out the wheel, unlocking the lock. You may have to use the range to open the wheel.
You can operate the method of keeping the bike straight.
Find the hole:
Get the tune from the rim slowly. Don’t pull out the tube with pressure.
Get some water in a bowl. Rinse out the tube with a little bit of air. The air will come out through the hole, making bubbles.
You can easily get the hole there.
Use the electric tape over the hole:
Get the tape and apply it through the leakage area. Make sure the tape is sticky and can tolerate the air pressure coming from the tube.
Pump the flat tire:
Put the tube inside the tire. Twist the valve screw to adjust the tube with the tire.
Add air in the tire using your portable air pump. Don’t put much air in the tube. This process is not permanent and flexible.
Finishing up:
Don’t go for a long ride with this condition. You must repair the professional tire kit.
How to fix a flat bike tire without tools?
Turn the bike upside down:
Keep the bike in a flat ground so that you can handle the process easily.
Hold the bike and turn it upside down in the ground. Go slowly to avoid any damages.
Take out the flat wheel:
Take out the wheel from the bike. Just unlock the wheel and take it out. You may need to use a range.
Get the tube out from the wheel:
Open the tire and get the tube out from the rim. Make it slowly so that the tube does not get damage.
Find the hole:
Use water to get the hole in the tube. Add some air in the tube and rinse out the tube with water.
Observe at the tube. You will see some bubbles coming out from the leakage area. Hold the hole with your hand.
Cut the tube with the chain rim:
If possible, tear the tube with your hand. Use the chain rim to cut the tube into two parts.
Hold the tube with your two hands and scratch it in the chain rim up and down. It should cut the tube easily.
Tie the tube tightly together:
Now, tie the two parts of the tube. Hold the two parts of the tube with your two hands and tie them together.
Make sure you have tied them tightly so that no air can come out. It will appear twisted.
Add air:
Put the tube inside the tire. Adjust the valve in the right place. Reassemble the wheel in the right place and lock it.
Add air in the tire slowly. Don’t add much air; otherwise, it may blast out.
Finishing up:
Look at the tire carefully. It should look like a regular tire. Ride the bike slowly until you change the tube.
How to fix a flat bike tire with slime?
Stand the bike in a flat place:
Stand the bike in a flat ground. Make sure the bike is straight, and it will not fall.
Turn the wheel to get the valve in the right position:
Turn the flat wheel to get the plugin the right spot.
The upper half position is a good position to operate a slime sealant in the tire.
Remove the valve cape:
Remove the valve cape. You will see a tiny and long stick-like object in the valve. Take it out.
Adjust the top of the slime bottle at the cape:
Adjust the top of the slime bottle at the valve. Make sure the sealant will not come out.
Pure the tire with sealant:
Fill the tube with the sealant. Press the bottle continuously. It will take a few movements to fill the tube.
Turn the wheel for a while:
Adjust the valve cap in the same position. Adjust it tightly so that the sealant will not come out.
Turn the wheel for a while. The sealant will reach the hole and cover it. You may have to add more air after the process.
Fill air into the tire:
Refill air in the tire with an air compressor. Fill air in the right volume.
Bottom line:
The methods on how to fix a flat bike tire without a patch can help you instantly in the meanwhile of your journey.
To avoid this nightmare, you should carry a patch kit with your bike in the case of a long journey.
Enjoy your riding.
